23

排水・湿潤連続養生によるコンクリートの耐久性向上技術の開発

宮原 茂禎*1・丸屋 剛*1・久壽米木 義昭*2・中田 愼一*2

養生によるコンクリートの高耐久化技術の開発を目的として,打込み直後にコンクリートから生じるブリーディングや気泡を排出する透水型枠養生と凝結後の速やかな給水による湿潤養生を,脱型せずに連続で行うことができる養生方法を考案し,実用化に向けた検討を行った。壁高欄を模擬した大型部材の試験施工により標準的な施工方法を確立するとともに,耐久性試験を実施して表層の透気係数の低減,中性化の抑制,塩分浸透の抑制などの養生効果を確認した。また,橋梁の高欄壁において試験適用を行い,現場施工においても十分な施工性が得られること,および非破壊検査によりコンクリート表層の品質が向上していることを確認した。

キーワード:  コンクリート,耐久性向上,透水型枠,湿潤養生

*1 技術センター 土木技術研究所 土木構工法研究室
*2 関西支店 土木部

Technique for Enhancing the Durability of Concrete Using Drainage and Underwater Curing

Shigeyoshi MIYAHARA*1, Tsuyoshi MARUYA*1, Yoshiaki KUSUMEGI*2 and Shinichi NAKATA*2

We have developed a technique for enhancing the durability of concrete through curing. A method of continuously draining excess water after placing and supplying water immediately after setting using a same formwork without de-molding was developed. For this study, we examined the practical applications of the method. A construction simulation for a concrete bridge railing was conducted to develop a standard method of curing. Durability tests showed that the method resulted in lower permeability, dense microstructure, prevented carbonation, and suppressed chloride ion penetration. This curing method was then applied to the construction of a temporary concrete bridge railing. The results show that the curing method was practical for actual construction. Non-destructive investigations verified the quality of the concrete’s surface layer.

Keywords:  concrete, improvement of durability, permeable form, underwater curing

*1 Material science and Research Section, Civil Engineering Research Institute, Technology Center
*2 Civil Engineering Department, Kansai Branch