連続ベルコン稼動状況監視システムの開発
片山 三郎*1・宮崎 裕道*1・松本 三千緒*1・近藤 高弘*1
連続ベルコンはズリの長距離,大量高速搬送を行う上で有効な手段です。しかし連続ベルコン稼働状況の監視技術は未成熟であるため,導入した多くの現場でトラブルが多く散見され稼働率を大きく下げているのが現状です。そこで我々は連続ベルコンの稼働状況を監視するための監視システムの開発を行いました。本システムはベルト蛇行,ホッパ詰り,プーリ回転ズレ,ベルト損傷およびベルト接合部を常時監視する5つのサブシステムから構成されます。そして現在,品川線シールドにて実証確認を終え運用を開始しています。今後は山岳トンネル対応の監視システムの実証実験を予定しています。
キーワード: | 連続ベルコン,稼働状況監視,蛇行,ホッパ閉塞,ベルト損傷 |
*1 技術センター 土木技術開発部 土木技術開発プロジェクト室
Development of Monitoring System for Continuous Belt Conveyers
Saburo KATAYAMA*1, Hiromichi MIYAZAKI*1, Michio MATSUMOTO*1 and Takahiro KONDO*1
A continuous belt conveyer can efficiently transport large quantities of muck at high speed across long distance. However, due to the lack of mature monitoring technology, the conveyors can cause considerable problems on construction sites, which limits their use. The authors have developed a system incorporating five subsystems that constantly monitor the operations of continuous belt conveyers, including meandering of the belt, the hopper blockage, belt damage and the belt joint. A test of the monitoring system at the Shinagawa shield construction site will soon be completed, while a second test is scheduled for the NATM tunnel.
Keywords: | continuous belt conveyer, operations monitoring, meander, hopper blockage, belt damage |
*1 Civil Engineering Development Section, Civil Engineering Research Institute, Technology Center
35 - REPORT OF TAISEI TECHNOLOGY CENTER No.44 2011