43

床衝撃音対策用仕上げ床の研究開発

平松 友孝*1

開発床は,下地を木根太とし上に合板を積層して構成したものであり,現状で多く採用されている乾式二重床とは異なり,重量床衝撃音の一般的な決定周波数である63Hz帯域における床衝撃音は増幅せず,また設置床スラブによらず一定の低減量が得られるため,予測精度の高い確実な対策を実施できます。したがって,デベロッパなどの発注者,設計事務所,住民とのトラブル回避に寄与できるものと想定されます。また,乾式二重床では重量床衝撃音の平均的な増幅量を見込むためコンクリート床スラブの厚さを17%程度(例えば300mm厚を350mm)厚くせざるをえなかったのに対して,開発床は見込む必要が無いため,コンクリート床スラブの厚さを従来より薄くすることが可能となります。したがって,構造躯体の低減,すなわちコストダウンに寄与できるものと判断されます。

キーワード:  床衝撃音,床衝撃音遮断性能,床衝撃音レベル低減量,仕上げ床,根太床,乾式二重床

*1 技術センター 建築技術研究所

Development of Floor Covering System for Floor Impact Sound Reduction

Tomotaka HIRAMATSU *1

The developed floor system consists of wooden common joint as groundwork plus laminated plywood. This is different from dry double floors that are often used these days, and certain measures are carried out by the prediction of high precision, because the floor impact sound at the 63Hz band which is the general decision frequency of weight floor impact sound does not amplify, and constant reduction value is provided without depending on a setting floor slab. It is considered that adoption of this floor will contribute to avoiding trouble with ordering persons, designer offices and other inhabitants. In addition, it is possible make the concrete floor slab thinner (by around 17%-) than conventionally, because weight floor impact sound does not amplify surely. Therefore, the system will contribute to reducing the amount of structure skeleton; namely, it will reduce costs.

Keywords:  floor impact sound, impact sound insulation of floors, reduction of transmitted impact sound, floor covering systems, common joint floor system, dry double flooring

*1 Building Engineering Research Institute, Technology Center