17

ポリマーセメントモルタル(PCM)を用いた増打ち補強壁

水平加力実験

中村 敏治*1・谷口 俊恭*2・小室 努*2

増打ち耐震補強を対象に,工事に伴う騒音・振動を極力抑える工法として,あと施工アンカーの替わりに補強壁鉄筋端部を既存躯体へ接着し,型枠・コンクリート打設の替わりにポリマーセメントモルタル(PCM)を左官工事で塗付けて補強するPCM増打ち補強工法を提案した。PCMを使用することにより,既存壁への目荒しも不要となる。PCM増打ち補強した1層1スパン試験体を対象に水平載荷実験を行った結果,既存壁への目荒しの省略や既存フレームへの接着定着でも,両壁は最大耐力時まで一体として挙動し,有効な耐震補強工法であること,塑性変形能力の向上は認められないこと,PCM増打ち補強壁の補強耐力は,荒川式で安全側に評価できること,などがわかった。

キーワード:  耐震補強,増打ち耐震壁,ポリマーセメントモルタル,接着定着

*1 技術センター 建築技術開発部 建築生産技術開発室
*2 設計本部 構造グループ

Strengthening a Shear Wall using the Polymer Cement Mortar

Shear Strength Test

Toshiharu NAKAMURA*1, Toshiyasu TANIGUCHI*2 and Tsutomu KOMURO*2

Polymer Cement Mortar (PCM) is a construction material that can be applied with little noise and vibration. This paper proposes using the material to strengthen shear walls. The construction method involves adhering the wall bar edges to the existing frame and a plasterer painting the PCM on the existing wall. The method eliminates the need for dowel anchors, molds, and concrete construction, as well as roughening of the existing wall. We examined the shear strength of single-story, single-span specimens strengthened with PCM. The results show that the PCM strengthened the wall, although it did not improve the wall's plastic deformation capacity. Arakawa's equation shows that the additional strength provided by the PCM is on the safe side.

Keywords:  strengthening method, strengthened shear wall, Polymer Cement Mortar, adhesive anchorage

*1 Construction Technology Development Section, Building Technology Development Department, Technology Center
*2 Structural Engineering Group, Design Division