セメントを使用しない環境配慮コンクリートの建築物適用に向けた検討

T-eConcrete®/セメント・ゼロ型,Carbon-Recycleの構造体コンクリート強度と中性化抵抗性

加藤 優志*1・渡邉 悟士*1,2・山本 佳城*1・今井 和正*1・黒岩 秀介*1,2

本検討ではT-eConcrete®/セメント・ゼロ型,Carbon-Recycleを建築物のプレキャストコンクリート部材として適用するために,構造体コンクリート強度および中性化抵抗性等の基礎物性を取得した。構造体強度補正値28S91についてはセメント・ゼロ型では通期で6 N/mm2,Carbon-Recycleでは通期で3 N/mm2とすることで構造体コンクリート強度を安全側に調合設計できることを確認した。また,促進中性化試験の結果から,実構造物に必要なかぶり厚さを試算した。試算の結果,計画供用期間65年の条件では,かぶり厚さはセメント・ゼロ型では約50mm,Carbon-Recycleでは約40mmが必要であることがわかった。

キーワード:コンクリート,高炉スラグ微粉末,CO2排出量,構造体コンクリート強度,中性化抵抗性

*1 技術センター 都市基盤技術研究部 構造研究室
*2 技術センター T-eConcrete実装プロジェクトチーム

Study to Apply Environment-Friendly Concrete without Portland Cement to Buildings

Strength of Concrete in Structure and Carbonation Resistance of T-eConcrete/ "Zero-Cement Type" and "Carbon-Recycle"

Yushi KATO*1, Satoshi WATANABE*1,2, Keiki YAMAMOTO*1, Kazumasa IMAI*1 and Shusuke KUROIWA*1,2

In this study, the basic physical properties, such as strength of concrete in structure and carbonation resistance, were obtained in order to apply T-eConcrete/“zero-cement type” and “Carbon-Recycle” to precast concrete members for buildings. It was confirmed that the strength of concrete in structure can be designed on the safe side by setting the strength correction factor 28S91 to 6 N/mm2 for “zero-cement type” and 3 N/mm2 for “Carbon-Recycle” all year round. In addition, the cover depth required for the actual structure was calculated from the accelerated carbonation test. From the results of calculations, in the case of a planned service life of 65 years, it was found that the cover depth needs to be about 50 mm for “zero-cement type” and about 40 mm for “Carbon-Recycle”.

Keywords: concrete, ground granulated blast-furnace slag, CO2 emissions, strength of concrete in structure, carbonation resistance

*1 Structure Research Section, Urban Engineering Research Department, Taisei Advanced Center of Technology
*2 T-eConcrete Implementation Project Team, Taisei Advanced Center of Technology