300N/mm2級超高強度コンクリートを用いたRC柱の耐火性能
加藤 雅樹*1・道越 真太郎*1・馬場 重彰*2・坂本 成弘*3・山本 佳城*4・黒岩 秀介*4・陣内 浩*4・辻谷 薫*4・吉田 泰*4
構造部材に高強度コンクリートを利用することにより,普通強度コンクリートに比べ部材の小断面化や軽量化,空間の自由度向上が期待できる。しかしながら,高強度コンクリートは火災時に耐力・剛性の低下が大きく,更に爆裂が発生する可能性がある。
本研究では,鋼繊維およびポリプロピレン繊維を混入した300N/mm2級超高強度コンクリートを用いたRC柱に対して,断面形状および軸力比をパラメータとした載荷加熱実験および火災時の耐力について検討を行った。その結果,300N/mm2級超高強度コンクリートを用いたRC柱は火災時にも爆裂しないこと及び,軸力比と耐火時間の関係を把握した。
キーワード: | 火災,爆裂,載荷加熱実験,熱伝導解析,座屈 |
*1 技術センター 建築技術研究所 防災研究室
*2 技術センター 技術企画部 企画室
*3 技術センター 建築技術開発部 ニューフロンティア技術開発室
*4 技術センター 建築技術研究所 建築構工法研究室
Fire Resistance of RC Columns of 300N/mm2 High Strength Concrete
Masaki KATO*1, Shintaro MICHIKOSHI*1, Shigeaki BABA*2, Shigehiro SAKAMOTO*3, Keiki YAMAMOTO*4, Shusuke KUROIWA*4, Hiroshi JINNAI*4, Kaoru TSUJIYA*4 and Yutaka YOSHIDA*4
Structural members made of high strength concrete are smaller, lighter, and provide larger spaces than members made of standard strength concrete. However, fire greatly decreases the strength and stiffness of high-strength concrete and may cause explosive spalling.
For the present study, a fire resistance test was conducted on RC columns made of 300N/mm2 class super-high strength concrete containing steel and polypropylene fibers. The shape of the cross-section and the axial force ratio were parameters in the test, and the proof strength was determined. Explosive spalling did not occur, and the relationship between the axial force ratio and the duration of fire resistance was clarified for these columns.
Keywords: | fire, explosive spalling, fire resistance test, thermal analysis, buckling |
*1 Disaster Prevention Research Section, Building Engineering Research Institute, Technology Center
*2 Planning Section, Technology Planning Department, Technology Center
*3 Advanced Technology Development Section, Building Technology Development Department, Technology Center
*4 Building System and Material Research Section, Building Engineering Research Institute, Technology Center
40 - REPORT OF TAISEI TECHNOLOGY CENTER No.44 2011