24

ひび割れ発生限界腐食量と腐食生成物の膨張率の定量化に基づく構造・耐久連成解析システムの高精度化

鈴木 三馨*1・福浦 尚之*1・丸屋 剛*1

鉄筋コンクリート構造物の劣化過程を予測するには,腐食ひび割れ発生過程を適切にモデル化することが重要である。本研究では,腐食膨張のモデル化を検討し,これまでに著者らが構築してきた鉄筋の腐食に関する構造・耐久連成解析システムの高精度化を図った。ひび割れ発生限界に関する既往の実験を再整理し,腐食膨張に関する簡易な解析と要素実験を行った上で,ひび割れ発生限界腐食量について既往実験との検証解析を行い,本連成解析システムにおける腐食膨張率を1.1〜2.0とすることで概ね実験結果を再現することができることを示した。

キーワード:  ひび割れ発生限界腐食量,進展期,腐食生成物,膨張率,連成解析

*1 技術センター 土木技術研究所 土木構工法研究室

Coupled-analysis Based on Quantification of Corrosion Weight Loss at Concrete-cracking and the Expansion Rate of the Corrosion

Mika SUZUKI*1, Naoyuki FUKUURA*1 and Tsuyoshi MARUYA*1

A model of concrete cracking caused by corrosion was developed in order to predict the deterioration process of reinforced concrete structures. This study aims to enhance the accuracy of the Structural-durability Coupled Analysis System that the authors have developed. This article shows three points; 1) the rearrangement work for previous experiments regarding crack generation limits; 2) a simple analysis and experiments on expansion caused by corrosion; 3) the conclusion that it is possible to basically replicate the experiments by setting the expansion rate of corrosion within the range of 1.1 to 2.0.

Keywords:  corrosion weight loss at concrete-cracking, developed phase, corrosion product, expansion rate, coupled analysis

*1 Civil Structure and Material Research Section, Civil Engineering Research Institute, Technology Center