10

レーザによる石床材の防滑処理工法の実用化

レーザノンスリップ工法

永井 香織*1・シバクマラン ウィグナラージャ*1・住吉 文夫*2

近年、滑りによる転倒事故は、毎年約850万人が怪我、3500名以上が死亡事故につながる大きな問題となっている。環境問題と安全問題の点から、既存の床を有効利用し、防滑効果を持たせることは、急務の課題である。このような背景を踏まえ、本研究は、新築時の床材の意匠性を残しながら既設床材に防滑性能を付加できる工法開発を行った。本工法は、世界で始めて、レーザ光を用いた可搬式加工機を開発し、無振動無騒音工事を実現したものである。現在、約1000m2適用され、好評を得ている。

キーワード:  安全,レーザ,石材,床材,防滑,可搬式加工機

*1 技術センター 建築技術研究所 構工法研究室
*2 建築本部 リニューアル部

Practical Use of Non-Slip Processing of Stone Flooring with Laser

Laser Non-Slip Processing

Kaori NAGAI*1, Sivakumaran WIGNARAJAH*1 and Fumio SUMIYOSHI*2

Every year in Japan, there are more than 8.5 million cases of people slipping and falling. The annual number of fatalities due to such accidents exceeds 3500. Therefore, it is imperative that existing flooring be made safe by taking measures to prevent slipping. This paper describes the development and use of a new method that employs a mobile laser processing system to carry out non-slip treatment to existing stone floors while maintaining the original appearance of the polished stone. The method is free of vibration, noise or dust, and about 1000 square meters of stone flooring have been treated up to now with good results.

Keywords:  safe, laser, stone, flooring, non-slip, mobile laser processing system

*1 Building System and Material Research Section, Building Engneering Research Institute, Technology Center
*2 Renewal Department, Building Construction Division