スリップフォーム工法におけるコンクリートの耐久性に関する実験的検討
スリップフォーム工法は,連続打設になるため,コンクリートの凝結特性に応じてコールドジョイントが発生しやすい。また,コンクリートの強度が十分に発現する前に型枠を移動することによるコンクリート表面の乱れやせん断力の影響によって,コンクリートの耐久性の低下が懸念される。本研究では,スリップフォーム工法におけるコンクリートの耐久性の定量的評価を目的として実験的検討を行った。その結果,コンクリートに高性能AE減水剤および硬化促進剤を添加し,凝結や超若材齢時のコンクリートの強度を調整することによるコンクリートの品質改善効果を確認した。また,コンクリートの強度が十分に発現する前に型枠を移動するため,コンクリート表面には気泡や皺が多く観察される。その対策として,型枠脱型直後に実施する「仕上げ」を行い,型枠移動の際に生じた表層の乱れを押えることで,コンクリート表層がより密実となり,耐久性を通常施工と同等以上にすることができることを確認した。
キーワード: | スリップフォーム工法,早期脱型,硬化促進剤,仕上げ,耐久性 |
*1 技術センター 土木技術研究所 土木構工法研究室
*2 土木本部 土木設計部
*3 土木本部 土木技術部
A Study on the Durability of Concrete Walls Constructed Using Slip Forms
This study examined the durability of concrete walls constructed using slip forms. The results were as follows. 1) The concrete is air-entrained and contains a high amount of water-reducing admixture and hardening accelerator, which control the setting and strength of the concrete at an early age. 2) In slip-form construction, the mold is moved before the concrete has developed the strength required for de-molding. This produces many air bubbles and wrinkles in the concrete’s surface. These effects can be removed by using a finisher after de-molding. 3) Pressing the concrete surface with a finisher increases the surface density. Therefore, concrete walls can be constructed using slip forms that are even more durable than concrete walls constructed by conventional methods.
Keywords: | slip-form construction, early de-molding, hardening accelerator, finisher, durability |
*1 Civil Structure and Material Research Section, Civil Engineering Research Institute, Technology Center
*2 Design Department, Civil Engineering Division
*3 Construction Engineering Department, Civil Engineering Division