22

コンクリートの分離抵抗性に関する簡易な定量的評価方法の開発

分離抵抗性の定量的な評価手法の開発により充填不良を回避

梁 俊*1・丸屋 剛*1・坂本 淳*1

現場では,スランプ試験後,スランプ板を叩いて,コンクリートの変形状態を観察することでコンクリートの分離抵抗性を判断することが多いが,定量的な評価には至っていない。本研究では,スランプが5〜15cmであるコンクリートを対象として,締固め完了エネルギーの観点から,スランプ試験後の試料をスランプフローが47cmになるまでハンマーでスランプ板を叩いた後,コンクリート試料上面の円形の有無を確認することによりコンクリートの分離抵抗性を定量的かつ簡易的に評価する方法を提案した。

キーワード:  スランプ,締固め完了エネルギー,分離抵抗性,叩き試験,スランプフロー

*1 技術センター 土木技術研究所 土木構工法研究室

Development of a Simple Method for Quantitatively Evaluating the Segregation Resistance of Concrete

Preventing Initial Defects by Choosing the Level of Segregation Resistance

Jun LIANG*1, Tsuyoshi MARUYA*1 and Jun SAKAMOTO*1

The segregation resistance of concrete at a site is often evaluated after examining the slump and is done by beating the concrete with a slump board and observing the transformation of the concrete. This, however, is not a quantitative evaluation. In this study, we suggest a simple method for quantitatively evaluating the segregation resistance of concrete. The segregation resistance is confirmed by drawing a circle in the top surface of the sample. After beating the slump board with a hammer and examining the slump, the slump flow of the sample became 47 cm. This reflects the compaction completion energy. This method can be applied to concrete slumps between 5 and 15 cm.

Keywords:  slump, compaction completion energy, segregation resistance, beating test, slump flow

*1 Civil Structure and Material Research Section, Civil Engineering Research Institute, Technology Center