高強度材料を用いた円形RC橋脚の正負交番載荷実験
村田 裕志*1・内田 悟史*1・本谷 幸康*2・福浦 尚之*1・細谷 学*2・長尾 賢二*2
高強度材料の実用化を目的として,高強度(降伏強度685N/mm2級)の軸方向鉄筋とSD345の帯鉄筋および圧縮強度50N/mm2程度のコンクリートを組み合わせた円形断面を有するRC高橋脚の耐震性能を把握するため,縮小試験体による正負交番載荷実験を行った。これにより,本実験条件下で,道路橋示方書に示されている既往の終局耐力および終局変位の算定式を適用できることを確認した。さらに,この実験に対して非線形ファイバーモデル解析を実施し,コンクリートの応力-ひずみ関係と耐荷・変形性能の関係について検討を行った。
キーワード: | 高強度鉄筋,RC橋脚,正負交番載荷実験,ファイバーモデル解析,耐力,変形性能 |
*1 技術センター 土木技術研究所 土木構工法研究室
*2 土木本部 土木設計部
Cyclic Loading Test of Circular Reinforced Concrete Pier Constructed of High Strength Materials
Hiroshi MURATA*1, Satoshi UCHIDA*1, Yukiyasu HONTANI*2, Naoyuki FUKUURA*1, Manabu HOSOTANI*2 and Kenji NAGAO*2
In order to find practical uses for high strength materials, a circular RC pier specimen containing USD685 axial reinforcements, SD345 stirrups, and concrete having a compressive strength of 50N/mm2 was subjected to a cyclic loading test. The results show that the specimen satisfied the requirements for ultimate load capacity and displacement as described in the Specifications for Highway Bridges. Furthermore, the relationship between the stress-strain of the concrete and the seismic performance was investigated using non-linear fiber model analysis.
Keywords: | high strength reinforcing bar, RC pier, cyclic loading test, fiber model analysis, ultimate strength, deformation capacity |
*1 Civil Structure and Material Research Section, Civil Engineering Research Institute, Technology Center
*2 Design Department, Civil Engineering Division
37 - REPORT OF TAISEI TECHNOLOGY CENTER No.44 2011