フラットプレートと鉄筋コンクリート造細柱からなる架構システムの開発
フラットプレートの押し抜きせん断破壊に関する実験と解析
飯塚 崇文*1・今井 和正*1・山﨑 英一*2・一色 裕二*2
当社ではフラットプレートと鉄筋コンクリート造柱からなる架構システムの開発に取り組んでいる。この架構システムでは地震時水平力を耐震壁などに集約的に負担させるため,柱は鉛直力を支持すればよく,高強度コンクリートによる細径柱部材の適用が可能となる。
このような場合,細柱との接合部におけるフラットプレートの押し抜きせん断破壊を防止することが重要となる。同破壊を防止するための接合ディテールを考案し,実大試験体の載荷実験および有限要素解析によりその有効性を確認した。
キーワード: | フラットプレート,細柱,押し抜きせん断,有限要素解析 |
*1 技術センター 建築技術研究所 建築構工法研究室
*2 設計本部 構造グループ
Development of Structural System Consisting of Flat Plates and Slender Reinforced Concrete Columns
Experiment and Analysis of Punching Shear Failure of Flat Plate
Takafumi IIZUKA*1, Kazumasa IMAI*1, Eiichi YAMAZAKI*2 and Yuji ISSHIKI*2
Taisei Corporation is developing an innovative structural system consisting of flat plates and reinforced concrete columns. In this system, the shear walls strongly resist lateral loads while the columns support only vertical loads. Therefore, slender columns constructed of ultra-high strength concrete can be used.
For such applications, punching shear failure of the flat plates must be prevented. This study examined the effectiveness of a new connection method through a loading experiment and finite element analysis using full-scale specimens.
Keywords: | Flat Plate, Slender Column, Punching Shear, Finite Element Analysis |
*1 Building System and Material Research Section, Building Engineering Research Institute, Technology Center
*2 Structural Engineering Group, Design Division
27 - REPORT OF TAISEI TECHNOLOGY CENTER No.44 2011