12

スパン中央に添筋重ね継手を有するプレキャストRC梁の開発

渡辺 英義*1・是永 健好*2・寺嶋 知宏*3・服部 敦志*4

最近の高層RC造集合住宅の建設では,品質確保や施工の効率化を目的として各種のプレキャスト工法が盛んに適用されており,鉄筋の継手工法の選定が重要な要因となっている。種々の鉄筋継手工法のうち,重ね継手は最も基本的で簡便な工法であり,特に突き合わされた主筋間に添筋を配置する「添筋重ね継手」は,過密配筋を防止でき施工性に優れているため,プレキャスト工法に適している。本研究では,両端がプレキャスト化され,スパン中央の後打ち部に添筋重ね継手が設けられたRC梁の構造性能を把握することを目的として曲げ実験および曲げせん断実験を実施した。本報では実験の概要と結果を述べ,付着割裂強度の評価法を提案している。

キーワード:  鉄筋コンクリート,プレキャスト,重ね継手,添筋,付着割裂強度

*1 技術センター 技術企画部 企画室
*2 技術センター 建築技術研究所 建築構工法研究室
*3 名古屋支店 設計部
*4 設計本部 構造グループ

Development of Precast Concrete Beams with Splice-bar Joints of Longitudinal Bars at the Midspan

Hideyoshi WATANABE*1, Takeyoshi KORENAGA*2, Tomohiro TERASHIMA*3 and Atsushi HATTORI*4

In this study, bending and shear tests were conducted to clarify the performance of reinforced concrete beams formed by joining together two precast beam-end elements at the midspan using cast-in-place concrete with splice-bar joints of main reinforcing bars. A total of 27 specimens were used in the tests. The parameters were the strength of the main bars and the cast-in-place concrete, the transverse reinforcement spacing, and the amount of U-shaped reinforcement in the lap splice region. As a result of the tests, a method is proposed for evaluating the bond splitting strength taking into account the effect of the U-shaped bars and the influence of the stress gradient. The proposed method was developed by modifying evaluation formulas currently in use.

Keywords:  reinforced concrete, precast, lap splices, splice-bar, bond splitting strength

*1 Planning Section, Technology Planning Department, Technology Center
*2 Building System and Material Research Section, Building Engineering Research Institute, Technology Center
*3 Design Department, Nagoya Branch
*4 Structural Engineering Group, Design and Proposal Division