添筋重ね継手を有するRC梁の付着割裂強度に関する実験研究

渡辺 英義*1・是永 健好*1・服部 敦志*2・原 孝文*2

梁せい方向の上下に主筋を重ね合わせる「縦重ね継手」や突き合わされた主筋間に添筋を配置する「添筋重ね継手」は,過密配筋の防止や主筋芯を同一にできることなどの利点を有するためPCa化工法や鉄筋先組み工法に適しており,品質確保や施工の合理化に有効である。本研究では,梁スパン中央での主筋の継手を「添筋を用いた縦重ね継手」とし,重ね部分をU字筋で補強した場合の性状を把握することを目的として曲げ実験を実施した。実験の結果,本報の重ね継手を有する場合でも,長期応力に対して許容応力度設計を行っても良いことが明らかとなった。また,既往の評価式を基本とし,U字筋の補強効果を考慮できるように修正した付着割裂強度の評価法を提案した。

キーワード: 鉄筋コンクリート,重ね継手,添筋,付着割裂強度,ひび割れ幅

*1 技術センター建築技術研究所建築構工法研究室
*2 設計本部構造グループ

Experimental Study on Bond Splitting Strength of RC Beam with Lap Splices Using Splint-bars

Hideyoshi WATANABE *1, Takeyoshi KORENAGA *1, Atsushi HATTORI *2 and Takafumi HARA *2

An increasing number of studies have recently been made on lap splices of main rebars overlapped in the beam depth direction or lap splices of main rebars placed end to end with splint-bars. In this study, lap splices of main rebars with splint-bars were used at the midspan of the beam. To examine the properties of the beam when the lap length was reinforced with U-shaped bars, a bending test was carried out. The result showed that the allowable stress design was acceptable for long-term stress even when using the lap splices discussed in this paper. A method was also proposed for evaluating the bond splitting strength. This method was developed by modifying evaluation formulas currently in use so that they took into consideration the reinforcing effects of the U-shaped bars.

Keywords: reinforced concrete, lap splices, splint-bar, bond splitting strength, crack width

*1 Building System and Material Research Section, Building Engineering Research Institute, Technology Center
*2 Structural Engineering Group, Design Division