現場における防振効果の測定方法

増田 潔*1

スタジオやホールで採用される浮き床や機械室で使用される防振装置の防振効果を現場で確認することは、防振・遮音工事の品質管理上非常に重要である。正確に防振効果を計ろうとすれば、防振材上の負荷質量にかかる力(加振力)と、防振材を介して構造躯体に伝わる力(伝達加振力)を測定してそれらの比を算出しなければならない。しかし、現場において伝達加振力を測定することはまず不可能である。そこで、負荷質量から構造躯体への伝達インピーダンスと構造躯体の駆動点インピーダンスを測定することで疑似力伝達率を測定する手法を開発し、実際の現場にてその有効性を確認した。

キーワード: 防振,現場測定,力伝達率,浮き床

*1 技術センター建築技術研究所環境研究室

Method for Field Measurement of Vibration Isolation Performance

Kiyoshi MASUDA *1

Concert halls or studios that are equipped with isolations systems such as floating slabs or other isolation equipment are sensitive to vibrations. During construction, these systems must be precisely measured. The isolation performance can be determined by precisely measuring the driving force of a load mass on the isolation materials and the transmission force on the building structure. The transmission vibration force, however, is impossible to measure at construction sites. This paper describes a new method for field measurement of the pseudo-force transmissibility calculated from the measured transmission impedance of the load mass to the structure and the driving point impedance of the structure. The effectiveness of the new method was confirmed by tests at actual construction sites.

Keywords: vibration isolation, field measurement, force transmissibility, floating slab

*1 Environmental Engineering Research Section, Building Engineering Research Institute, Technology Center