太径曲線パイプルーフ工法の位置計測システムの開発

ワイヤリンク式位置計測システム

渡部 昭一*1・宮崎 裕道*2・松本 三千緒*2・近藤 高弘*2

太径曲線パイプルーフ工法は、アーチ状の大口径曲線パイプルーフを支保工として、2本のシールドトンネルを非開削で接合し、大断面地下空間を構築する新しい施工法である。太径曲線パイプルーフの施工は、到達側シールドの設置した坑口に到達させる高い施工精度が要求される。しかしながら、シールドトンネルの内部の狭隘な空間から見通しの効かない曲線管の先端位置を計測するには高度な技術が必要となる。そこで、ワイヤーと変位センサー(レーザ変位計)を組合わせて、見通しの効かない曲線管の先端位置をリアルタイムで計測するシステムを開発し、変位測定器単体による要素実験と全体系での実験を行い、高い計測精度が確保可能なこととデータの再現性があることを確認したので、その結果について報告する。

キーワード: 曲線パイプルーフ,3次元位置計測,レーザー変位計

*1 技術センター土木技術開発部地下空間開発室

*2 土木本部機械部

Measuring System for Constructing Large-diameter Curved-pipe Roofs

Measuring System Using a Wire and Laser Measurement Sensors

Shoichi WATABE *1, Hiromichi MIYAZAKI *2, Michio MATUMOTO *2 and Takahiro KONDOU *2

The large-diameter curved pipe roof construction method is a new technology for constructing large underground spaces by the non-open-cut method. In this method, a large-diameter curved pipe roof is constructed between two pre-constructed shield tunnels. This roof is capable of withstanding soil and water pressures. However, high reaching accuracy is required in order for the boring machine to reach the end-point entrance room in the arrival- side shield tunnel. This paper describes the development of a measuring system that consists of a wire and laser measurement sensors and is capable of measuring in real time the location of the hidden head of a curved pipe. The measuring system's high accuracy was confirmed by an element experiment and a full-scale model experiment.

Keywords: curved pipe roof, measuring system, laser measurement sensor

*1 Underground Space Development Section, Civil Engineering Technology Development Dept., Technology Center

*2 Machinery Department, Civil Engineering Division