温度依存性を考慮した室内VOCs濃度の長期予測手法の検討

簡易予測モデルの概要及び実験との比較検証

市原 真希*1・藤村 淳一*2・市原 英樹*1・小林 光*3・樋渡 潔*1

近年問題となっているシックハウスは、建材等から放散されるVOCsが原因の1つとなっている。これに対して、対策方法を盛り込んだ改正建築基準法が2003年7月に施行された。しかしながら、その内容は仕様規定に留まっているため、より一層の居住環境の安全性を求めるニーズも存在する。このニーズに応えるために、室内VOCs濃度の長期予測が必要となる。また、実務での予測には、簡易性が重要となる。本検討では、正確な長期予測を簡易に行うことを目的に、建材からの放散速度に大きな影響を与える温度変動を考慮した予測モデルを構築、実験による検証を行い、プログラム化を図った。検討モデルを用いた予測値と実験結果を比較したところ、概ね一致する結果を得た。今後、室内濃度予測プログラムを設計段階及び施工段階での検討に役立てていく予定である。

キーワード: 簡易長期予測,内部拡散支配型,アレニウスの関係,相当材齢,チャンバー実験,濃度予測プログラム

*1 技術センター建築技術研究所環境研究室

*2 設計本部2群統括グループ

*3 設計本部設備計画グループ

Long-term Predictions of Indoor VOCs Concentrations Using a Model that Considers Temperature Changes

Outline of Simplified Prediction Model and Comparison between Predicted and Actual Values

Maki ICHIHARA *1, Jun-ichi FUJIMURA *2, Hideki ICHIHARA *1, Hikaru KOBAYASHI *3 and Kiyoshi HIWATASHI *1

VOCs emitted from building materials are one of the main causes of the sick building syndrome that has become an issue in recent years. The amended Building Standard Law on Sick House Issues came into effect on July 1, 2003. However, this law applies only to the specification code. Society requires greater hygienic safety in residential environments. Long-term predictions of indoor VOCs concentrations are needed in order to meet this need. Such predictions should be precise and easy to perform. The prediction model used in this study considers temperature changes, which are a primary factor in VOCs emissions building materials. The prediction method was validated through experiments. The predicted values roughly corresponded to the results of the experiments. The long-term indoor prediction model will be incorporated into the designs of future residences.

Keywords: simplified long-term prediction, inside diffusion control, Arrhenius relation, equivalent material age, chamber experiment, concentration prediction program

*1 Environmental Engineering Research Section, Building Engineering Research Institute, Technology Center

*2 M/E Engineering Group, Design Division

*3 M/E Engineering Development Group, Design Division