ラッピング工法用防爆システムの開発
メタンガス発生地盤対象

芳賀 由紀夫・栄 毅熾・島田 哲治

 本防爆システムは、防水シートでトンネル外周を被覆する技術であるラッピング工法を補完するものである。メタンガスの発生する現場でもラッピング工法を適用可能とした本システムは、「防爆型溶着装置」及び「防水シート静電気除去・監視装置」から構成される。前者は、電熱ヒータ内蔵の溶着用ウェッジを防爆構造化し、更にメタンガスの発火温度以下とする加熱制御方法及び異常時温度保護と合わせ特殊防爆構造型式検定を取得した。後者は、プラスチック製防水シートの静電気を除去してメタンガスの着火源となる放電電位を抑制するもので、各種試験後、除去・監視装置の有効性を確認した。

キーワード: 防爆,メタンガス,腐食性環境,防水シート,ラッピング工法,静電気除去

Development of an Explosion-proof System for the Wrapping Method
Applicable to grounds including methane gas

Yukio Haga, Takeshi Sakae and Tetsuji Shimada

This system is a supplement to the Wrapping Method which is the technology to wrap the tunnel perimeter with waterproof sheet. It is composed of explosion-proof sheet welding device, static electricity removal device for the waterproof sheet and the static electricity observation device. Hence, the Wrapping Method is applicable to grounds including methane gas. The sheet welding device has a heating wedge with explosion-proof structure where the temperature is controlled below the ignition point of the methane mixed air. The official approval for the special explosion-proof structure has been obtained with this system. The static electricity removal device restrains the electric discharge that ignites methane mixed air.

keywords: methane gas, explosion-proof, Wrapping Method, waterproof, removal of a static electricity